LC-MS comes up often in conversation and rarely with the context attached. Here we lay out the basics in order, then work through the practical considerations.
Last reviewed on 2025-09-27. Where a claim depends on a specific study, the study is described rather than over-claimed.
Handling practices reduce the risk of contamination and degradation. Hygroscopic peptides should be equilibrated to room temperature before opening to prevent condensation on the powder. Weighing and reconstitution in a controlled environment limit exposure to moisture and airborne particles. Aliquotting reconstituted solutions avoids repeated freeze-thaw cycles that can cause aggregation or precipitation. When a purity specification is not met, investigation may consider synthesis byproducts, purification losses, storage conditions, and analytical variability rather than a single cause.
Peptide purity can change during storage, handling, and reconstitution, and lyophilized peptides are generally more stable than solutions because water promotes hydrolysis and aggregation. Residual moisture, oxygen, and trace metals can accelerate degradation even in solid form. Temperature fluctuations during shipping may cause condensation and local moisture uptake. Quality control therefore includes appearance, water content, and analytical testing before and after storage challenges. Peptides containing cysteine, methionine, or tryptophan are especially susceptible to oxidation, while asparagine and glutamine residues can deamidate under neutral or alkaline conditions.
Additional techniques address components that reversed-phase chromatography may not resolve. Ion-exchange chromatography separates by charge, size-exclusion chromatography detects aggregates, and capillary electrophoresis offers high separation efficiency. Water content is measured by Karl Fischer titration, residual solvents by gas chromatography, and elemental impurities by inductively coupled plasma mass spectrometry. Amino acid analysis or nitrogen determination can estimate peptide content on a mass basis. Purity is frequently reported as area percent, yet standardized comparison across laboratories remains an open question because methods and reporting practices differ.
Peptide purity testing measures how much of a sample consists of the intended peptide sequence compared with related substances, water, counterions, and residual solvents. No single analytical method captures all of these components at once. Reversed-phase high-performance liquid chromatography with ultraviolet detection is widely used because it separates peptides by hydrophobicity. The reported purity value therefore depends on the chosen method, column, mobile phase, and detection wavelength. Established practice treats purity as method-dependent rather than an absolute property of the material.
| Property | Value | Notes |
|---|---|---|
| Appearance of lyophilized powder | White to off-white solid | Visual check only; color does not measure purity. |
| Solubility | Water or aqueous buffer, sequence dependent | Some sequences need organic co-solvent. |
| Typical storage temperature | -20 °C or lower | Desiccated and protected from light. |
| Common degradation routes | Hydrolysis, oxidation, deamidation | Rates depend on sequence and environment. |
| Identity confirmation | Mass spectrometry | Mass match supports identity; purity is separate. |
Independent verification is used when a supplier result needs confirmation or when a material supports regulated work. A second laboratory can repeat reverse-phase HPLC and mass spectrometry on the same sample. Discrepancies may arise from different columns, gradients, detection wavelengths, or sample preparation. Moisture uptake and counterion content can lower net peptide mass without changing area percent. Documentation of methods and raw data helps distinguish analytical variation from a true quality difference.
Quality control for peptides begins with a documented specification that states the required purity, identity, and appearance. Suppliers often release research-grade material at 95% or greater by HPLC area, but this threshold is not universal. A certificate of analysis typically records the lot number, sequence, test methods, and measured values. The document allows a user to compare batches and to trace deviations. Specifications should match the intended use rather than a generic label.
Storage and handling conditions affect both peptide stability and the accuracy of later purity tests. Lyophilized powders are commonly kept desiccated at -20 °C or below, while reconstituted solutions require a defined buffer, pH, and temperature range. Repeated freeze-thaw cycles can promote aggregation, oxidation, or hydrolysis over time. Each cycle may alter the chromatogram and complicate comparison with earlier results. Stability data, when available, should guide handling intervals and solvent choice.
Orthogonal separation methods address impurities that RP-HPLC may not resolve. Size-exclusion chromatography detects aggregates and higher-order species, while ion-exchange chromatography separates charge variants. Capillary electrophoresis can assess charge-to-mass ratios and, in some formats, size-based impurities. Amino acid analysis and nitrogen determination estimate peptide content rather than chromatographic purity. Because each technique has a different selectivity, a complete purity profile usually combines results from more than one method. The choice of method depends on the impurity classes of concern.
Reversed-phase high-performance liquid chromatography (RP-HPLC) is widely used to estimate peptide purity. Separation depends on interactions between peptide residues and a hydrophobic stationary phase, with gradients of water and organic solvent. Ultraviolet detection near 214 nm responds to the peptide backbone and to many related impurities. The resulting chromatogram is often expressed as area percent, which reports the proportion of peak area assigned to the main component. Different columns, gradients, and wavelengths can produce different purity values for the same material.
Mass spectrometry provides complementary information about molecular identity and certain impurities. Electrospray ionization and matrix-assisted laser desorption/ionization are common ionization techniques for peptides. A measured mass close to the expected value supports correct sequence length and modifications, while extra mass signals can reveal truncations, adducts, or incomplete deprotection. Mass spectrometry alone is not a quantitative purity assay, because ionization efficiency varies between compounds. Coupling liquid chromatography to mass spectrometry links retention time with mass and helps assign peaks that ultraviolet detection records.
An alpha helix (or α-helix) is a sequence of amino acids in a protein that are twisted into a coil (a helix). The alpha helix is the most common structural arrangement in the secondary structure of proteins. It is also the most extreme type of local structure, and it is the local structure that is most easily predicted from a sequence of amino acids. The alpha helix has a right-handed helix conformation in which every backbone N−H group hydrogen bonds to the backbone C=O group of the amino acid that is four residues earlier in the protein sequence. The alpha helix is also commonly called a: Pauling–Corey–Branson α-helix (from the names of three scientists who described its structure) 3.613-helix because there are 3.6 amino acids in one ring, with 13 atoms being involved in the ring formed by the hydrogen bond (starting with amidic hydrogen and ending with carbonyl oxygen)
Corin, also called atrial natriuretic peptide-converting enzyme, is a protein that in humans is encoded by the CORIN gene. Human corin, a polypeptide of 1042 amino acids, consists of an N-terminal cytoplasmic domain, a transmembrane domain and an extracellular region with two frizzled-like domains, eight LDL receptor-like domains, a scavenger receptor-like domain and a C-terminal trypsin-like serine protease domain. Corin is synthesized as a zymogen that is activated by PCSK6. Corin exhibits a trypsin-like catalytic activity favoring basic residues at the P1 position. Human corin contains 19 N-glycosylation sites. N-glycans promote corin expression on the cell surface and protect corin from metalloproteinase-mediated shedding.
Much of the genetic manipulation done in CHO cells is done in cells lacking DHFR enzyme. This genetic selection scheme remains one of the standard methods to establish transfected CHO cell lines for the production of recombinant therapeutic proteins. The process begins with the molecular cloning of the gene of interest and the DHFR gene into a single mammalian expression system. The plasmid DNA carrying the two genes is then transfected into cells, and the cells are grown under selective conditions in a thymidine-lacking medium. Surviving cells will have the exogenous DHFR gene along with the gene of interest integrated in its genome. The growth rate and the level of recombinant protein production of each cell line varies widely. To obtain a few stably transfected cell lines with the desired phenotypic characteristics, evaluating several hundred candidate cell lines may be necessary. The CHO and CHO-K1 cell lines can be obtained from a number of biological resource centres such as the European Collection of Cell Cultures, which is part of the Health Protection Agency Culture Collections. These organizations also maintain data, such as growth curves, timelapse videos of growth, images, and subculture routine information.
Albert Pinhasov (Hebrew: אלברט פנחסוב; born 9 February 1972) is the Rector of Ariel University. He is a researcher in the fields of Molecular Psychiatry and Psychopharmacology.He also served as Vice President and Dean for Research & Development and the Head of the Department of Molecular Biology at Ariel University. Albert Pinhasov was born on 9 February 1972 in the city of Namangan, Uzbekistan. From 1990 to 1994, he studied at the Gorky Academy of Medicine, in the city of Nizhny Novgorod, Russia. In 1994, he immigrated to Israel where he continued his education at Tel Aviv University. He was awarded a Master of Science degree (MSc) in 1998 and a PhD in the field of Molecular Biology and Clinical Biochemistry under the mentorship of Illana Gozes in 2002 from Tel Aviv University.
The Aviation Safety Reporting System (ASRS) collects voluntarily submitted aviation safety incident/situation reports from pilots, controllers and others. The ASRS uses reports to identify system deficiencies, issue alert messages, and produce two publications, CALLBACK, and ASRS Directline. The collected information is made available to the public, and is used by the FAA, NASA and other organizations working in research and flight safety.
Sources: en.wikipedia.org
AS9100 Revision C (2009), Quality Management System – Requirements for Aviation, Space and Defense Organizations The update of AS9100 from revision B to C is largely to address the following question: "Our supplier is repeatedly late on delivery and failing to meet our requirements, how is it possible that they still have their AS9100 certificate?" That is, the AS9100C changes are driven by repeated delivery of non-conforming product and repeated late delivery by organizations that held AS9100A/B certifications. Those organizations had documented controls that conformed to the standard, however, there were insufficient processes in place to assure effectiveness of those controls. The response in this AS9100 revision is to elevate the requirements for Risk Management and to make Risk Management an integrated theme throughout the standard. A major challenge to AS9100B-compliant organizations was the new AS9100 auditing standards defined in AS9101 Revision D, which eliminates the clause-based compliance checklist and requires organizations to provide evidence of effectiveness of their systems and processes. Summary of changes between AS9100B and AS9100C:
Central obesity can be a feature of lipodystrophies, a group of diseases that is either inherited, or due to secondary causes (often protease inhibitors, a group of medications against AIDS). Central obesity is a symptom of Cushing's syndrome and is also common in patients with polycystic ovary syndrome (PCOS). Central obesity is associated with glucose intolerance and dyslipidemia. Once dyslipidemia becomes a severe problem, an individual's abdominal cavity would generate elevated free fatty acid flux to the liver. The effect of abdominal adiposity occurs not just in those who are obese, but also affects people who are non-obese and it also contributes to insulin sensitivity. Ghroubi et al. (2007) examined whether abdominal circumference is a more reliable indicator than BMI or the presence of knee osteoarthritis in obese patients. They found that it actually appears to be a factor linked with the presence of knee pain as well as osteoarthritis in obese study subjects. Ghroubi et al. (2007) concluded that a high abdominal circumference is associated with great functional repercussion. Research published in The Lancet (2023) found that high levels of visceral fat were related to poorer cognitive performance. The findings suggest that maintaining a healthy weight and metabolic health may be important for preserving cognitive function.
Increased blood CRP levels were higher in people with avian flu H7N9 compared to those with H1N1 (more common) influenza, with a review reporting that severe H1N1 influenza had elevated CRP. In 2020, people infected with COVID-19 in Wuhan, China, had elevated CRP. MedlinePlus Encyclopedia: C-reactive protein Inflammation, Heart Disease and Stroke: The Role of C-Reactive Protein (American Heart Association) C-Reactive+Protein at the U.S. National Library of Medicine Medical Subject Headings (MeSH) CRP: analyte monograph - The Association for Clinical Biochemistry and Laboratory Medicine George Vrousgos, N.D. - Southern Cross University Archived 2020-02-18 at the Wayback Machine Human CRP genome location and CRP gene details page in the UCSC Genome Browser. Overview of all the structural information available in the PDB for UniProt: P02741 (C-reactive protein) at the PDBe-KB.
Affimers are recombinant proteins. As they are manufactured using recombinant bacterial production processes, the batch-to-batch consistency for Affimers is improved compared to polyclonal antibodies, overcoming some of the issues of reproducibility and security of supply. These synthetic antibodies were engineered to be stable, non-toxic, biologically neutral and contain no post-translational modifications or disulfide bridges. Two separate loop sequences, incorporating a total of 12 to 36 amino acids, form the target interaction surface so interaction surfaces can range form 650–1000 Å. The large interaction surface results allows binding to target proteins. Affimer technology has been commercialised and developed by Avacta, which is developing these affinity reagents as tools for diagnostics and as biotherapeutics.
The LCPO method uses a linear approximation of the two-body problem for a quicker analytical calculation of ASA. The approximations used in LCPO result in an error in the range of 1-3 Ų. In 2011, a method was presented that calculates ASA fast and analytically using a power diagram. Accessible surface area is often used when calculating the transfer free energy required to move a biomolecule from an aqueous solvent to a non-polar solvent, such as a lipid environment. The LCPO method is also used when calculating implicit solvent effects in the molecular dynamics software package AMBER. It is recently suggested that (predicted) accessible surface area can be used to improve prediction of protein secondary structure.
Sources: en.wikipedia.org
CGRP antagonists can be used for both acute migraine treatment as well as prophylactically. CGRP is a neuropeptide which is thought to induce migraines via vasodilation of cranial arteries. CGRP can also release inflammatory agents and cause nervous system sensitization. It is theorized that by antagonizing the CGRP receptor of the trigeminal ganglia, lowered CGRP is released and less migraine occurs. Erenumab is a highly selective human monoclonal antibody which is a promising new development in migraine treatment. It has low risk of hepatoxicity like gepants can have, due to being mostly eliminated via proteolysis. There have been some studies suggesting the benefit of using melatonin for prophylaxis of migraine, however, there is a lack of strength of evidence due to a low number of studies as well as conflicting results. Melatonin has a good safety profile but there have been rare instances of serious side effects. More studies are needed in order to suggest the therapeutic use of melatonin for prophylaxis of migraine.
Being the smallest alkali metal, lithium forms the widest variety of and most stable organometallic compounds, which are bonded covalently. Organolithium compounds are electrically non-conducting volatile solids or liquids that melt at low temperatures, and tend to form oligomers with the structure (RLi)x where R is the organic group. As the electropositive nature of lithium puts most of the charge density of the bond on the carbon atom, effectively creating a carbanion, organolithium compounds are extremely powerful bases and nucleophiles. For use as bases, butyllithiums are often used and are commercially available. An example of an organolithium compound is methyllithium ((CH3Li)x), which exists in tetrameric (x = 4, tetrahedral) and hexameric (x = 6, octahedral) forms. Organolithium compounds, especially n-butyllithium, are useful reagents in organic synthesis, as might be expected given lithium's diagonal relationship with magnesium, which plays an important role in the Grignard reaction. For example, alkyllithiums and aryllithiums may be used to synthesise aldehydes and ketones by reaction with metal carbonyls. The reaction with nickel tetracarbonyl, for example, proceeds through an unstable acyl nickel carbonyl complex which then undergoes electrophilic substitution to give the desired aldehyde (using H+ as the electrophile) or ketone (using an alkyl halide) product.
Unk is sometimes used instead of Xaa, but is less standard. Ter or * (from termination) is used in notation for mutations in proteins when a stop codon occurs. It corresponds to no amino acid at all. In addition, many nonstandard amino acids have a specific code. For example, several peptide drugs, such as Bortezomib and MG132, are artificially synthesized and retain their protecting groups, which have specific codes. Bortezomib is Pyz–Phe–boroLeu, and MG132 is Z–Leu–Leu–Leu–al. To aid in the analysis of protein structure, photo-reactive amino acid analogs are available. These include photoleucine (pLeu) and photomethionine (pMet).
A variety of natural and synthetic inhibitors of ATP synthase have been discovered. These have been used to probe the structure and mechanism of ATP synthase. Some may be of therapeutic use. There are several classes of ATP synthase inhibitors, including peptide inhibitors, polyphenolic phytochemicals, polyketides, organotin compounds, polyenic α-pyrone derivatives, cationic inhibitors, substrate analogs, amino acid modifiers, and other miscellaneous chemicals. Some of the most commonly used ATP synthase inhibitors are oligomycin and DCCD. E. coli ATP synthase is the simplest known form of ATP synthase, with 8 different subunit types. Bacterial F-ATPases can occasionally operate in reverse, turning them into an ATPase. Some bacteria have no F-ATPase, using an A/V-type ATPase bidirectionally. Yeast ATP synthase is one of the best-studied eukaryotic ATP synthases; and five F1, eight FO subunits, and seven associated proteins have been identified. Most of these proteins have homologues in other eukaryotes.
Topical nonsteroidal anti-inflammatory drugs provide pain relief in common conditions such as muscle sprains and overuse injuries. Since the side effects are also lesser, topical preparations could be preferred over oral medications in these conditions. Some novel and investigational analgesics include subtype-selective voltage-gated sodium channel blockers such as funapide and raxatrigine, as well as multimodal agents such as ralfinamide. Audioanalgesia Electroanalgesia Pain management Patient-controlled analgesia Pain in babies Congenital analgesia (insensitivity to pain)
Sources: en.wikipedia.org
Most lyophilized peptides are stored desiccated at -20 °C or lower, protected from light. Some sequences require -80 °C for long-term stability. Storage recommendations depend on sequence, moisture content, and expected duration.
Water enables hydrolysis, deamidation, and oxidation reactions that are slow or absent in dry powder. Solution pH, buffer composition, and temperature influence the rate. Freezing and thawing can also cause aggregation or precipitation.
It tracks purity, mass, and sometimes biological activity over time under defined conditions. Results indicate degradation rates and suitable storage limits. Accelerated conditions provide early signals but do not always predict room-temperature behavior.
It usually refers to the relative peak area of the target peptide in a chromatogram, not the mass fraction of the entire sample. Different analytical methods can yield different purity values. Water, counterions, and residual solvents are excluded unless the calculation specifies otherwise.